Machine
| Standards |
|
| Blade spacing |
18.4 cm
7.25 in. |
| Gang angle |
0-12 degrees |
| Front gang blades |
|
| Rear gang blades |
|
| Weight |
|
| Number of blades |
|
| Weight per blade |
117.9 kg
260 lb |
| Commander™ blade diameter |
|
| Commander™ blade thickness |
|
| Blade diameter |
55.9 cm
22 in. |
| Blade thickness |
6.5 mm
0.256 in. |
| Rolling basket |
Double Rolling basket, Reverse Knife edge, followed by round bar or flat bar rolling basket |
| Horsepower requirement |
24.5-34.25 engine kW/m (10-14 engine hp/ft) |
| Transport width |
Three-section: 3.76 m (12 ft, 4 in), 3.76 m (12 ft, 4 in.), 4.27 m (14 ft), and 5.3 m (17 ft, 5 in.)
Five-section: 4.65 m (15 ft, 3 in.) and 4.65 m (15 ft, 3 in.) |
| Transport height |
Three-section: 3.35 m (11 ft), 3.96 m (13 ft), 4.27 m (14 ft), and 4.19 m (13 ft, 9 in.)
Five-section: 3.9 m (12 ft, 10 in.) and 4.34 m (14 ft, 3 in.) |
| Underframe clearance |
3.66 m
12 ft |
| Transport length |
Without rear hitch
Three-section: 10.06 m
33 ft
Five-section: 12.19 m
40 ft |
| Working width |
Gang angle at 0 degrees
Three-section: 6.25 m (20 ft, 6 in.), 7.75 m (25 ft, 5 in.), 9.2 m (30 ft, 3 in.), and 10.3 m (33 ft, 10 in.)
Five-section: 13.26 m (43 ft, 6 in.) and 15.1 m (49 ft, 6 in.) |
| Working depth |
|
| Depth control |
Single point and TruSet™ system |
| Maximum operating depth |
10.16 cm
4 in.
*Maximum depth may be shallower depending on ground conditions and tire package. |
| Operating speed |
12.9-16.1 km/h
8-10 mph |
| Note |
|