New W36M Commercial Walk-Behind Mower

Specifications

Engine manufacturer/model	FS481V
Engine power	At 3600 rpm 14.5 hp* 10.8 kW
Fuel tank capacity	5.4 U.S. gal. 20.4 L
Mower deck Size	36 in. 91.4 cm
Blade tip speed	Approximately 18,000 fpm 5,486 m/min
Transmission	Two Hydro-Gear™ ZT-2800™ unitized pump and wheel motor transmissions and ergonomic handles with spring-loaded neutral lock
Speed range	Forward, 0-6.5 mph 0-10.5 km/h Reverse, 0-3 mph 0-4.8 km/h
Drive wheels	18x6.5-8
Caster wheels	9x3.5-4 semi-pneumatic
Warranty	24 month

Manufacturer/model	FS481V
Power	At 3600 rpm 14.5 hp* 10.8 kW
Displacement	36.8 cu in. 603 cc
Cylinders	V-twin
Crankcase capacity
Operating speed	3,600 rpm
Idle Speed
Ignition/Starter	Electronic/recoil start
Valving	Overhead valves
Oil filter	Standard
Lubrication	Full pressure
Governor	Flyweight all speed governor
Hour meter	Standard, digital
Cooling system	Air cooled
Air cleaner	Paper element with foam precleaner
Muffler	Low tone

Fuel type	Gasoline
Fuel tank capacity	5.4 U.S. gal. 20.4 L
Fuel pump	Vacuum-operated diaphragm
Fuel delivery system	Carburetor
Fuel tank switch/Shut off valve	No
Filler neck opening
Fuel pickup	Top draw

Ignition	Electronic spark
Hourmeter	Standard, digital
Operator presence starting system	PTO off, park brake engaged, speed lever in neutral

Transmission	Two Hydro-Gear ZT-2800 unitized pump and wheel motor transmissions and ergonomic handles with spring-loaded neutral lock
Wheel motors
Shift mechanism	Ergonomic handles with spring-loaded neutral lock

Drive wheels	18x6.5-8
Outside to outside tire measurement
Caster wheels	9x3.5-4 semi-pneumatic
Shift mechanism

Forward speeds	Infinite
Reverse speeds	Infinite
Speed range	Forward, 0-6.5 mph 0-10.5 km/h Reverse, 0-3 mph 0-4.8 km/h

Type	Dynamic braking with hand controls, hand lever to set parking brake

Height	44.8 in. 114 cm
Length with deck	76.4 in. 194 cm
Width	Deflector down - 50 in. 127 cm Deflector up for storage - 40 in. 102 cm
Weight	With full fuel and oil, 590 lb 268 kg

Size	Material 10-gauge, 0.14-in. (3.42-mm) fabricated steel deck top with added 10-gauge, 0.14-in. (3.42-mm) spindle mounting plate, 7-gauge, 0.19-in. (4.8-mm) side skirts with reinforcement bar Blades Two high-lift Length - 18 in. 45.7 cm Thickness - 0.25 in. 0.64 cm Blade drive V-Belt Blade tip speed Approximately 18,000 fpm 5,486 m/min Cutting height 1.5-4.5 in. 3.8-11.4 cm 36 in. 91.4 cm

Warranty	24 month

Date collected	11July-2022